Description: Add libteec headers from v4.0.0 optee-client
Author: Abhinaba Rakshit <abhinaba.rakshit@oss.qualcomm.com>
Origin: other, Qualcomm forked mink specific changes over OPTEE-Test
Last-Update: 2026-07-11
---
This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
Index: optee_test/libteec/include/tee_client_api.h
===================================================================
--- /dev/null
+++ optee_test/libteec/include/tee_client_api.h
@@ -0,0 +1,555 @@
+/*
+ * Copyright (c) 2014, STMicroelectronics International N.V.
+ * All rights reserved.
+ * Copyright (c) 2015, Linaro Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef TEE_CLIENT_API_H
+#define TEE_CLIENT_API_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <stddef.h>
+#include <stdbool.h>
+#include <limits.h>
+
+/*
+ * Defines the number of available memory references in an open session or
+ * invoke command operation payload.
+ */
+#define TEEC_CONFIG_PAYLOAD_REF_COUNT 4
+
+/**
+ * Defines the maximum size of a single shared memory block, in bytes, of both
+ * API allocated and API registered memory. There is no good value to put here
+ * (limits depend on specific config used), so this define does not provide any
+ * restriction in this implementation.
+ */
+#define TEEC_CONFIG_SHAREDMEM_MAX_SIZE ULONG_MAX
+
+/**
+ * Flag constants indicating the type of parameters encoded inside the
+ * operation payload (TEEC_Operation), Type is uint32_t.
+ *
+ * TEEC_NONE                   The Parameter is not used
+ *
+ * TEEC_VALUE_INPUT            The Parameter is a TEEC_Value tagged as input.
+ *
+ * TEEC_VALUE_OUTPUT           The Parameter is a TEEC_Value tagged as output.
+ *
+ * TEEC_VALUE_INOUT            The Parameter is a TEEC_Value tagged as both as
+ *                             input and output, i.e., for which both the
+ *                             behaviors of TEEC_VALUE_INPUT and
+ *                             TEEC_VALUE_OUTPUT apply.
+ *
+ * TEEC_MEMREF_TEMP_INPUT      The Parameter is a TEEC_TempMemoryReference
+ *                             describing a region of memory which needs to be
+ *                             temporarily registered for the duration of the
+ *                             Operation and is tagged as input.
+ *
+ * TEEC_MEMREF_TEMP_OUTPUT     Same as TEEC_MEMREF_TEMP_INPUT, but the Memory
+ *                             Reference is tagged as output. The
+ *                             Implementation may update the size field to
+ *                             reflect the required output size in some use
+ *                             cases.
+ *
+ * TEEC_MEMREF_TEMP_INOUT      A Temporary Memory Reference tagged as both
+ *                             input and output, i.e., for which both the
+ *                             behaviors of TEEC_MEMREF_TEMP_INPUT and
+ *                             TEEC_MEMREF_TEMP_OUTPUT apply.
+ *
+ * TEEC_MEMREF_WHOLE           The Parameter is a Registered Memory Reference
+ *                             that refers to the entirety of its parent Shared
+ *                             Memory block. The parameter structure is a
+ *                             TEEC_MemoryReference. In this structure, the
+ *                             Implementation MUST read only the parent field
+ *                             and MAY update the size field when the operation
+ *                             completes.
+ *
+ * TEEC_MEMREF_PARTIAL_INPUT   A Registered Memory Reference structure that
+ *                             refers to a partial region of its parent Shared
+ *                             Memory block and is tagged as input.
+ *
+ * TEEC_MEMREF_PARTIAL_OUTPUT  Registered Memory Reference structure that
+ *                             refers to a partial region of its parent Shared
+ *                             Memory block and is tagged as output.
+ *
+ * TEEC_MEMREF_PARTIAL_INOUT   The Registered Memory Reference structure that
+ *                             refers to a partial region of its parent Shared
+ *                             Memory block and is tagged as both input and
+ *                             output, i.e., for which both the behaviors of
+ *                             TEEC_MEMREF_PARTIAL_INPUT and
+ *                             TEEC_MEMREF_PARTIAL_OUTPUT apply.
+ */
+#define TEEC_NONE                   0x00000000
+#define TEEC_VALUE_INPUT            0x00000001
+#define TEEC_VALUE_OUTPUT           0x00000002
+#define TEEC_VALUE_INOUT            0x00000003
+#define TEEC_MEMREF_TEMP_INPUT      0x00000005
+#define TEEC_MEMREF_TEMP_OUTPUT     0x00000006
+#define TEEC_MEMREF_TEMP_INOUT      0x00000007
+#define TEEC_MEMREF_WHOLE           0x0000000C
+#define TEEC_MEMREF_PARTIAL_INPUT   0x0000000D
+#define TEEC_MEMREF_PARTIAL_OUTPUT  0x0000000E
+#define TEEC_MEMREF_PARTIAL_INOUT   0x0000000F
+
+/**
+ * Flag constants indicating the data transfer direction of memory in
+ * TEEC_Parameter. TEEC_MEM_INPUT signifies data transfer direction from the
+ * client application to the TEE. TEEC_MEM_OUTPUT signifies data transfer
+ * direction from the TEE to the client application. Type is uint32_t.
+ *
+ * TEEC_MEM_INPUT   The Shared Memory can carry data from the client
+ *                  application to the Trusted Application.
+ * TEEC_MEM_OUTPUT  The Shared Memory can carry data from the Trusted
+ *                  Application to the client application.
+ */
+#define TEEC_MEM_INPUT   0x00000001
+#define TEEC_MEM_OUTPUT  0x00000002
+
+/**
+ * Return values. Type is TEEC_Result
+ *
+ * TEEC_SUCCESS                 The operation was successful.
+ * TEEC_ERROR_GENERIC           Non-specific cause.
+ * TEEC_ERROR_ACCESS_DENIED     Access privileges are not sufficient.
+ * TEEC_ERROR_CANCEL            The operation was canceled.
+ * TEEC_ERROR_ACCESS_CONFLICT   Concurrent accesses caused conflict.
+ * TEEC_ERROR_EXCESS_DATA       Too much data for the requested operation was
+ *                              passed.
+ * TEEC_ERROR_BAD_FORMAT        Input data was of invalid format.
+ * TEEC_ERROR_BAD_PARAMETERS    Input parameters were invalid.
+ * TEEC_ERROR_BAD_STATE         Operation is not valid in the current state.
+ * TEEC_ERROR_ITEM_NOT_FOUND    The requested data item is not found.
+ * TEEC_ERROR_NOT_IMPLEMENTED   The requested operation should exist but is not
+ *                              yet implemented.
+ * TEEC_ERROR_NOT_SUPPORTED     The requested operation is valid but is not
+ *                              supported in this implementation.
+ * TEEC_ERROR_NO_DATA           Expected data was missing.
+ * TEEC_ERROR_OUT_OF_MEMORY     System ran out of resources.
+ * TEEC_ERROR_BUSY              The system is busy working on something else.
+ * TEEC_ERROR_COMMUNICATION     Communication with a remote party failed.
+ * TEEC_ERROR_SECURITY          A security fault was detected.
+ * TEEC_ERROR_SHORT_BUFFER      The supplied buffer is too short for the
+ *                              generated output.
+ * TEEC_ERROR_TARGET_DEAD       Trusted Application has panicked
+ *                              during the operation.
+ */
+
+/**
+ *  Standard defined error codes.
+ */
+#define TEEC_SUCCESS                       0x00000000
+#define TEEC_ERROR_STORAGE_NOT_AVAILABLE   0xF0100003
+#define TEEC_ERROR_GENERIC                 0xFFFF0000
+#define TEEC_ERROR_ACCESS_DENIED           0xFFFF0001
+#define TEEC_ERROR_CANCEL                  0xFFFF0002
+#define TEEC_ERROR_ACCESS_CONFLICT         0xFFFF0003
+#define TEEC_ERROR_EXCESS_DATA             0xFFFF0004
+#define TEEC_ERROR_BAD_FORMAT              0xFFFF0005
+#define TEEC_ERROR_BAD_PARAMETERS          0xFFFF0006
+#define TEEC_ERROR_BAD_STATE               0xFFFF0007
+#define TEEC_ERROR_ITEM_NOT_FOUND          0xFFFF0008
+#define TEEC_ERROR_NOT_IMPLEMENTED         0xFFFF0009
+#define TEEC_ERROR_NOT_SUPPORTED           0xFFFF000A
+#define TEEC_ERROR_NO_DATA                 0xFFFF000B
+#define TEEC_ERROR_OUT_OF_MEMORY           0xFFFF000C
+#define TEEC_ERROR_BUSY                    0xFFFF000D
+#define TEEC_ERROR_COMMUNICATION           0xFFFF000E
+#define TEEC_ERROR_SECURITY                0xFFFF000F
+#define TEEC_ERROR_SHORT_BUFFER            0xFFFF0010
+#define TEEC_ERROR_EXTERNAL_CANCEL         0xFFFF0011
+#define TEEC_ERROR_TARGET_DEAD             0xFFFF3024
+#define TEEC_ERROR_STORAGE_NO_SPACE        0xFFFF3041
+
+/**
+ * Function error origins, of type TEEC_ErrorOrigin. These indicate where in
+ * the software stack a particular return value originates from.
+ *
+ * TEEC_ORIGIN_API          The error originated within the TEE Client API
+ *                          implementation.
+ * TEEC_ORIGIN_COMMS        The error originated within the underlying
+ *                          communications stack linking the rich OS with
+ *                          the TEE.
+ * TEEC_ORIGIN_TEE          The error originated within the common TEE code.
+ * TEEC_ORIGIN_TRUSTED_APP  The error originated within the Trusted Application
+ *                          code.
+ */
+#define TEEC_ORIGIN_API          0x00000001
+#define TEEC_ORIGIN_COMMS        0x00000002
+#define TEEC_ORIGIN_TEE          0x00000003
+#define TEEC_ORIGIN_TRUSTED_APP  0x00000004
+
+/**
+ * Session login methods, for use in TEEC_OpenSession() as parameter
+ * connectionMethod. Type is uint32_t.
+ *
+ * TEEC_LOGIN_PUBLIC    	 No login data is provided.
+ * TEEC_LOGIN_USER         	Login data about the user running the Client
+ *                         	Application process is provided.
+ * TEEC_LOGIN_GROUP        	Login data about the group running the Client
+ *                         	Application process is provided.
+ * TEEC_LOGIN_APPLICATION  	Login data about the running Client Application
+ *                         	itself is provided.
+ * TEEC_LOGIN_USER_APPLICATION  Login data about the user and the running
+ *                          	Client Application itself is provided.
+ * TEEC_LOGIN_GROUP_APPLICATION Login data about the group and the running
+ *                          	Client Application itself is provided.
+ */
+#define TEEC_LOGIN_PUBLIC       0x00000000
+#define TEEC_LOGIN_USER         0x00000001
+#define TEEC_LOGIN_GROUP        0x00000002
+#define TEEC_LOGIN_APPLICATION  0x00000004
+#define TEEC_LOGIN_USER_APPLICATION  0x00000005
+#define TEEC_LOGIN_GROUP_APPLICATION  0x00000006
+
+/**
+ * Encode the paramTypes according to the supplied types.
+ *
+ * @param p0 The first param type.
+ * @param p1 The second param type.
+ * @param p2 The third param type.
+ * @param p3 The fourth param type.
+ */
+#define TEEC_PARAM_TYPES(p0, p1, p2, p3) \
+	((p0) | ((p1) << 4) | ((p2) << 8) | ((p3) << 12))
+
+/**
+ * Get the i_th param type from the paramType.
+ *
+ * @param p The paramType.
+ * @param i The i-th parameter to get the type for.
+ */
+#define TEEC_PARAM_TYPE_GET(p, i) (((p) >> (i * 4)) & 0xF)
+
+typedef uint32_t TEEC_Result;
+
+/**
+ * struct TEEC_Context - Represents a connection between a client application
+ * and a TEE.
+ */
+typedef struct {
+	/* Implementation defined */
+	int fd;
+	bool reg_mem;
+	bool memref_null;
+} TEEC_Context;
+
+/**
+ * This type contains a Universally Unique Resource Identifier (UUID) type as
+ * defined in RFC4122. These UUID values are used to identify Trusted
+ * Applications.
+ */
+typedef struct {
+	uint32_t timeLow;
+	uint16_t timeMid;
+	uint16_t timeHiAndVersion;
+	uint8_t clockSeqAndNode[8];
+} TEEC_UUID;
+
+/**
+ * struct TEEC_SharedMemory - Memory to transfer data between a client
+ * application and trusted code.
+ *
+ * @param buffer      The memory buffer which is to be, or has been, shared
+ *                    with the TEE.
+ * @param size        The size, in bytes, of the memory buffer.
+ * @param flags       Bit-vector which holds properties of buffer.
+ *                    The bit-vector can contain either or both of the
+ *                    TEEC_MEM_INPUT and TEEC_MEM_OUTPUT flags.
+ *
+ * A shared memory block is a region of memory allocated in the context of the
+ * client application memory space that can be used to transfer data between
+ * that client application and a trusted application. The user of this struct
+ * is responsible to populate the buffer pointer.
+ */
+typedef struct {
+	void *buffer;
+	size_t size;
+	uint32_t flags;
+	/*
+	 * Implementation-Defined
+	 */
+	int id;
+	size_t alloced_size;
+	void *shadow_buffer;
+	int registered_fd;
+	union {
+		bool dummy;
+		uint8_t flags;
+	} internal;
+} TEEC_SharedMemory;
+
+/**
+ * struct TEEC_TempMemoryReference - Temporary memory to transfer data between
+ * a client application and trusted code, only used for the duration of the
+ * operation.
+ *
+ * @param buffer  The memory buffer which is to be, or has been shared with
+ *                the TEE.
+ * @param size    The size, in bytes, of the memory buffer.
+ *
+ * A memory buffer that is registered temporarily for the duration of the
+ * operation to be called.
+ */
+typedef struct {
+	void *buffer;
+	size_t size;
+} TEEC_TempMemoryReference;
+
+/**
+ * struct TEEC_RegisteredMemoryReference - use a pre-registered or
+ * pre-allocated shared memory block of memory to transfer data between
+ * a client application and trusted code.
+ *
+ * @param parent  Points to a shared memory structure. The memory reference
+ *                may utilize the whole shared memory or only a part of it.
+ *                Must not be NULL
+ *
+ * @param size    The size, in bytes, of the memory buffer.
+ *
+ * @param offset  The offset, in bytes, of the referenced memory region from
+ *                the start of the shared memory block.
+ *
+ */
+typedef struct {
+	TEEC_SharedMemory *parent;
+	size_t size;
+	size_t offset;
+} TEEC_RegisteredMemoryReference;
+
+/**
+ * struct TEEC_Value - Small raw data container
+ *
+ * Instead of allocating a shared memory buffer this structure can be used
+ * to pass small raw data between a client application and trusted code.
+ *
+ * @param a  The first integer value.
+ *
+ * @param b  The second value.
+ */
+typedef struct {
+	uint32_t a;
+	uint32_t b;
+} TEEC_Value;
+
+/**
+ * union TEEC_Parameter - Memory container to be used when passing data between
+ *                        client application and trusted code.
+ *
+ * Either the client uses a shared memory reference, parts of it or a small raw
+ * data container.
+ *
+ * @param tmpref  A temporary memory reference only valid for the duration
+ *                of the operation.
+ *
+ * @param memref  The entire shared memory or parts of it.
+ *
+ * @param value   The small raw data container to use
+ */
+typedef union {
+	TEEC_TempMemoryReference tmpref;
+	TEEC_RegisteredMemoryReference memref;
+	TEEC_Value value;
+} TEEC_Parameter;
+
+/**
+ * struct TEEC_Session - Represents a connection between a client application
+ * and a trusted application.
+ */
+typedef struct {
+	/* Implementation defined */
+	TEEC_Context *ctx;
+	uint32_t session_id;
+} TEEC_Session;
+
+/**
+ * struct TEEC_Operation - Holds information and memory references used in
+ * TEEC_InvokeCommand().
+ *
+ * @param   started     Client must initialize to zero if it needs to cancel
+ *                      an operation about to be performed.
+ * @param   paramTypes  Type of data passed. Use TEEC_PARAM_TYPES macro to
+ *                      create the correct flags.
+ *                      0 means TEEC_NONE is passed for all params.
+ * @param   params      Array of parameters of type TEEC_Parameter.
+ * @param   session     Internal pointer to the last session used by
+ *                      TEEC_InvokeCommand with this operation.
+ *
+ */
+typedef struct {
+	uint32_t started;
+	uint32_t paramTypes;
+	TEEC_Parameter params[TEEC_CONFIG_PAYLOAD_REF_COUNT];
+	/* Implementation-Defined */
+	TEEC_Session *session;
+} TEEC_Operation;
+
+/**
+ * TEEC_InitializeContext() - Initializes a context holding connection
+ * information on the specific TEE, designated by the name string.
+
+ * @param name    A zero-terminated string identifying the TEE to connect to.
+ *                If name is set to NULL, the default TEE is connected to. NULL
+ *                is the only supported value in this version of the API
+ *                implementation.
+ *
+ * @param context The context structure which is to be initialized.
+ *
+ * @return TEEC_SUCCESS  The initialization was successful.
+ * @return TEEC_Result   Something failed.
+ */
+TEEC_Result TEEC_InitializeContext(const char *name, TEEC_Context *context);
+
+/**
+ * TEEC_FinalizeContext() - Destroys a context holding connection information
+ * on the specific TEE.
+ *
+ * This function destroys an initialized TEE context, closing the connection
+ * between the client application and the TEE. This function must only be
+ * called when all sessions related to this TEE context have been closed and
+ * all shared memory blocks have been released.
+ *
+ * @param context       The context to be destroyed.
+ */
+void TEEC_FinalizeContext(TEEC_Context *context);
+
+/**
+ * TEEC_OpenSession() - Opens a new session with the specified trusted
+ *                      application.
+ *
+ * @param context            The initialized TEE context structure in which
+ *                           scope to open the session.
+ * @param session            The session to initialize.
+ * @param destination        A structure identifying the trusted application
+ *                           with which to open a session.
+ *
+ * @param connectionMethod   The connection method to use.
+ * @param connectionData     Any data necessary to connect with the chosen
+ *                           connection method. Not supported, should be set to
+ *                           NULL.
+ * @param operation          An operation structure to use in the session. May
+ *                           be set to NULL to signify no operation structure
+ *                           needed.
+ *
+ * @param returnOrigin       A parameter which will hold the error origin if
+ *                           this function returns any value other than
+ *                           TEEC_SUCCESS.
+ *
+ * @return TEEC_SUCCESS      OpenSession successfully opened a new session.
+ * @return TEEC_Result       Something failed.
+ *
+ */
+TEEC_Result TEEC_OpenSession(TEEC_Context *context,
+			     TEEC_Session *session,
+			     const TEEC_UUID *destination,
+			     uint32_t connectionMethod,
+			     const void *connectionData,
+			     TEEC_Operation *operation,
+			     uint32_t *returnOrigin);
+
+/**
+ * TEEC_CloseSession() - Closes the session which has been opened with the
+ * specific trusted application.
+ *
+ * @param session The opened session to close.
+ */
+void TEEC_CloseSession(TEEC_Session *session);
+
+/**
+ * TEEC_InvokeCommand() - Executes a command in the specified trusted
+ * application.
+ *
+ * @param session        A handle to an open connection to the trusted
+ *                       application.
+ * @param commandID      Identifier of the command in the trusted application
+ *                       to invoke.
+ * @param operation      An operation structure to use in the invoke command.
+ *                       May be set to NULL to signify no operation structure
+ *                       needed.
+ * @param returnOrigin   A parameter which will hold the error origin if this
+ *                       function returns any value other than TEEC_SUCCESS.
+ *
+ * @return TEEC_SUCCESS  OpenSession successfully opened a new session.
+ * @return TEEC_Result   Something failed.
+ */
+TEEC_Result TEEC_InvokeCommand(TEEC_Session *session,
+			       uint32_t commandID,
+			       TEEC_Operation *operation,
+			       uint32_t *returnOrigin);
+
+/**
+ * TEEC_RegisterSharedMemory() - Register a block of existing memory as a
+ * shared block within the scope of the specified context.
+ *
+ * @param context    The initialized TEE context structure in which scope to
+ *                   open the session.
+ * @param sharedMem  pointer to the shared memory structure to register.
+ *
+ * @return TEEC_SUCCESS              The registration was successful.
+ * @return TEEC_ERROR_OUT_OF_MEMORY  Memory exhaustion.
+ * @return TEEC_Result               Something failed.
+ */
+TEEC_Result TEEC_RegisterSharedMemory(TEEC_Context *context,
+				      TEEC_SharedMemory *sharedMem);
+
+/**
+ * TEEC_AllocateSharedMemory() - Allocate shared memory for TEE.
+ *
+ * @param context     The initialized TEE context structure in which scope to
+ *                    open the session.
+ * @param sharedMem   Pointer to the allocated shared memory.
+ *
+ * @return TEEC_SUCCESS              The registration was successful.
+ * @return TEEC_ERROR_OUT_OF_MEMORY  Memory exhaustion.
+ * @return TEEC_Result               Something failed.
+ */
+TEEC_Result TEEC_AllocateSharedMemory(TEEC_Context *context,
+				      TEEC_SharedMemory *sharedMem);
+
+/**
+ * TEEC_ReleaseSharedMemory() - Free or deregister the shared memory.
+ *
+ * @param sharedMem  Pointer to the shared memory to be freed.
+ */
+void TEEC_ReleaseSharedMemory(TEEC_SharedMemory *sharedMemory);
+
+/**
+ * TEEC_RequestCancellation() - Request the cancellation of a pending open
+ *                              session or command invocation.
+ *
+ * @param operation Pointer to an operation previously passed to open session
+ *                  or invoke.
+ */
+void TEEC_RequestCancellation(TEEC_Operation *operation);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Index: optee_test/libteec/include/tee_client_api_extensions.h
===================================================================
--- /dev/null
+++ optee_test/libteec/include/tee_client_api_extensions.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2016, Linaro Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef TEE_CLIENT_API_EXTENSIONS_H
+#define TEE_CLIENT_API_EXTENSIONS_H
+
+#include <tee_client_api.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * TEEC_RegisterMemoryFileDescriptor() - Register a block of existing memory as
+ * a shared block within the scope of the specified context.
+ *
+ * @param context    The initialized TEE context structure in which scope to
+ *                   open the session.
+ * @param sharedMem  pointer to the shared memory structure to register.
+ * @param fd         file descriptor of the target memory.
+ *
+ * @return TEEC_SUCCESS              The registration was successful.
+ * @return TEEC_ERROR_OUT_OF_MEMORY  Memory exhaustion.
+ * @return TEEC_Result               Something failed.
+ */
+TEEC_Result TEEC_RegisterSharedMemoryFileDescriptor(TEEC_Context *context,
+						    TEEC_SharedMemory *sharedMem,
+						    int fd);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* TEE_CLIENT_API_EXTENSIONS_H */
